* RECOMMENDED * HP ProLiant Command Line Array Configuration Utility for Solaris 10

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Added support for Solaris 10 8/11 on below HP ProLiant Servers:

• HP ProLiant BL460c Gen8 Server
• HP ProLiant BL465c Gen8 Server
• HP ProLiant BL660c Gen8 Server
• HP ProLiant DL360p Gen8 Server
• HP ProLiant DL380p Gen8 Server
• HP ProLiant DL385p Gen8 Server
• HP ProLiant DL560 Gen8 Server
• HP ProLiant ML350p Gen8 Server

Added support for Solaris 10 8/11 on below Smart Array Controlles: 

• HP Smart Array P421 Controller
• HP Smart Array P420 Controller
• HP Smart Array P420i Controller
• HP Smart Array P410i Controller
• HP Smart Array P222 Controller
• HP Smart Array P220i Controller

Added support for Solaris 10 8/11 on below Storage Enclosures: 

• HP D2700 Disk Enclosure
• HP D2600 Disk Enclosure
• HP D2200sb Storage Blade

 Added support for the following new features:

• 5 percent cache ratio increment.
• Any logical drive can be deleted irrespective of the order.
• A Logical Drive can now be moved from one Array to another. This includes the support of moving the logical drive between arrays of different Physical Drive types also.
• More than 128 physical drives.
• Physical drive authentication status.
• "setcache" option to enable or disable flushing of cache.
• Optional duration parameter to change led status.
• "spareactivation" to support turning predictive spare rebuilds on/off.
• Solid State Drive (SSD) gas gauge.
• RAID 1 (ADM) and RAID 1+0 (ADM).

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Enhanced acucli to use POSIX semaphores instead of SYSV semaphores.  With the new implementation SYSV IPC keys will no longer be generated.

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

• Added support for HP StorageWorks D2600 Disk Enclosure
• Added support for HP StorageWorks D2700 Disk Enclosure
• Enhanced HPQacucli to prevent certain array operations in case physical drive with zero(invalid) size is found

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

• Added support for HP ProLiant BL620c G7 Server
• Added support for HP ProLiant BL680c G7 Server
• Added support for HP ProLiant DL585 G7 Server

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

• Added support for HP ProLiant BL465c G7 Server
• Added support for HP ProLiant BL685c G7 Server
• Added support for HP ProLiant DL385 G7 Server

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Fixed an issue where intermittently, hpacucli was not responding (or) not launchable again after exiting ungracefully

• Added support for HP ProLiant DL980 G7 Server
• Added support for HP ProLiant BL460c G7 Server

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Added support for HP ProLiant DL580 G7 Server

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Fixed the issue where OS Logical drive configured as Software RAID was being deleted by hpacucli utility

• Added support for "diag" command in hpacucli console.The diag command outputs diagnostic information about a specified controller or all controllers on the system
• Added support for "Tab" key in hpacucli console for command completion

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Fixed an issue where 'deleteaftererase' option may not work

• Added support for HP Smart Array P411 Controller
• Added support for command history in hpacucli console
  

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.

Added support for following HP Smart Array controllers:

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

• HP ProLiant BL465c G6 server
• HP ProLiant DL385 G6 server
• HP ProLiant DL585 G6 server
• HP ProLiant DL370 G6 server
• HP ProLiant ML370 G6 server
• HP ProLiant BL460c G6 server
• HP ProLiant DL360 G6 server
• HP ProLiant DL380 G6 server
• HP ProLiant BL685c G6 server

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

• Improved ACUcli command execution/response time
• Added support for the following servers:
• HP ProLiant DL385 G5p
• HP ProLiant BL460c G5

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Support added for new series of Firmware for HP Smart Array SAS controllers. This new firmware for SAS controllers supports the below features:

• Dual Domain/Port - Smart Array P800
• 108 HDD Maximum- Smart Array E500, P400, P400i, P800
• 64 LUN Support- Smart Array E500, P400, P400i, P800
• Dual Path SATA - Smart Array P800
• Hot Replacing Expanders - Smart Array P800

NOTE:

• These features are supported only on SAS controllers having Firmware revision 5.10 or later
• Requires CPQary3 1.90 or later.

Added support for the following HP ProLiant servers:

• HP ProLiant DL585 G5
• HP ProLiant DL385 G5
• HP ProLiant DL365 G5
• HP ProLiant DL785 G5
• HP ProLiant BL465c G5
• HP ProLiant BL685c G5

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.