 |
» |
|
|
|
|
|
|
|
|
SUPPORT COMMUNICATION -
CUSTOMER NOTICE
HP Z400, Z600, and Z800 Workstations - Enabling Multi-stream Audio in Microsoft Windows XP
NOTICE: The information in this document, including products and software versions, is current as of the Release Date. This document is subject to change without notice.
DESCRIPTION
Follow the steps provided in the DETAILS section to enable multi-stream audio on the Z series workstations running Microsoft Windows XP.
DETAILS
-
Ensure you have speakers and/or headphones plugged into the green audio port on the back of the chassis, as well as the front headphone port on the front of the chassis.
-
On the Realtek control panel, click the
Mixer
tab.
-
Click the Toolbox icon (it looks like a wench) .
-
On the
Playback
section, select the
Enable playback multi-streaming
checkbox and click
OK
to return to the
Mixer
tab of the Realtek control panel.
-
On the
Playback
section of the
Mixer
tab, Select
Realtek HD Audio output
from the drop-down list.
-
Start the audio playback application that you would like to use with the rear panel output.
-
On the Realtek control panel, click the
Mixer
tab.
-
On the
Playback
section of the
Mixer
tab, Select
Realtek HD Audio 2nd output
from the drop-down list.
-
Start the other audio playback application. This application will stream the audio to the front panel output.
NOTE: The internal speaker will be disabled if multi-streaming audio is enabled.
RECEIVE PROACTIVE UPDATES
Receive support alerts (such as the document you are reading), as well as updates on drivers, software, firmware, and customer replaceable components, pro-actively via e-mail through HP Subscriber's Choice for your specific HP Workstation.
Click here to sign up for Subscriber's Choice
Hardware Platforms Affected: HP Z400 Workstation, HP Z600 Workstation, HP Z800 Workstation
Components Affected: Not Applicable
Operating Systems Affected: Microsoft Windows XP, Microsoft Windows XP 64-Bit Edition
Software Affected: Not Applicable
Third Party Products Affected: Not Applicable
Support Communication Cross Reference ID: IA01716874
©Copyright 2009 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law, neither HP or its affiliates, subcontractors or suppliers will be liable for incidental,special or consequential damages including downtime cost; lost profits;damages relating to the procurement of substitute products or services; or damages for loss of data, or software restoration. The information in this document is subject to change without notice. Hewlett-Packard Company and the names of Hewlett-Packard products referenced herein are trademarks of Hewlett-Packard Company in the United States and other countries. Other product and company names mentioned herein may be trademarks of their respective
owners.
|
|
Printable version
